How we check our numbers
Every calculator on Measure the Dream turns your measurements into a quantity using a formula and a few standard figures. This page explains where those figures come from, how the math is checked, and what to do if you spot a mistake.
Where the figures come from
Each calculator page has a “How it works” section with its formula and the figures it uses. Wherever possible they come from a published source rather than a guess:
- Product figures come from what’s printed on the product: the yield on a bag of concrete, the coverage on a can of paint, the square feet in a box of flooring or the lights in a strand. Because these vary by brand, the calculators let you change them to match what you’re buying.
- Air conditioner sizing follows the Energy Star room air conditioner sizing chart, including its adjustments for sun, people and kitchens.
- Stair dimensions are checked against the limits in the International Residential Code, the model code most US towns build on.
- Turkey thawing and cooking times follow the USDA’s guidance for US cooks and Food Standards Scotland’s guidance on the metric site.
- Electricity costs use the rate you enter; the default is close to the recent US average reported by the U.S. Energy Information Administration.
- Heating and cooling sizes use common per-square-foot rules of thumb by climate zone. They’re a starting point, and each of those pages says so: a contractor’s Manual J load calculation is the right way to size a system.
How each calculator is tested
Automated tests run before every update to the site. Every calculator has to produce a sensible result from its default inputs, and the formulas are compared against answers worked out by hand, including what happens with empty or zero inputs. The site isn’t published unless all of the tests pass. The reference tables on calculator pages are generated by running the same formula, so a table can’t disagree with the calculator above it.
How results are rounded
Things you buy whole, such as bags, boxes, sheets, strands and pallets, are always rounded up, because running short in the middle of a job costs more than one extra bag. Volumes and weights are shown to a sensible number of decimal places so you can compare quotes. Most calculators include a waste allowance you can change.
What the calculators don’t do
They give estimates for planning and shopping. They aren’t engineering, and they don’t know your local building code, your soil or your exact products. For anything structural, electrical, gas-fired or that needs a permit, check with your local building department or a licensed professional.
Corrections
If you think a result is wrong, email [email protected] with the calculator, the numbers you entered and what you expected. Corrections are checked first, fixed as quickly as possible, and the fix is added to the tests so it stays fixed.