Self-leveling concrete calculator
Enter the floor size and how deep the leveler needs to be on average. You’ll get the number of bags, using the coverage printed on the bag.
Measuring in meters? Use the metric version
Bags to buy
7 bags
- Floor area
- 144 sq ft
- Volume
- 3 cubic feet
- Exact bags
- 6.7
Shop for this project
As an Amazon Associate, Measure the Dream earns from qualifying purchases.
How it works
Bags of self-leveler list how many square feet they cover at a set depth, usually 1/8 inch. The calculator scales that to your depth: at 1/4 inch a bag covers half as much, at 1/2 inch a quarter. It multiplies by your floor area, adds your extra percentage and rounds up.
The depth to use is the average, not the deepest spot. Lay a long straightedge or level across the floor and measure the gaps under it in a few places to estimate it.
Example
With floor length 12 ft, floor width 12 ft, average depth 0.25 in, bag covers 47 sq ft at 1/8 in, extra for low spots and spillage 10%, the answer is 7 bags.
How to measure
Measure the floor area, then check the depth you need with a long straightedge or a laser level. Low spots set the thickness: if the deepest dip is ¼ inch, plan on at least that across the area you’re pouring.
Coverage varies a lot between products, so enter the figure printed on your bag, usually given as square feet at ⅛ inch thick.
Bags of self-leveler by room size and depth
At 47 sq ft per bag at ⅛ inch, with 10% extra.
| Area | ⅛ in deep | ¼ in deep | ½ in deep |
|---|---|---|---|
| 5 × 8 ft bathroom | 1 | 2 | 4 |
| 10 × 10 ft | 3 | 5 | 10 |
| 12 × 12 ft | 4 | 7 | 14 |
| 12 × 16 ft | 5 | 9 | 18 |
| 20 × 20 ft | 10 | 19 | 38 |
Common mistakes
- Skipping the primer. Most self-levelers require their own primer on concrete or wood, or the pour can bond poorly and crack.
- Leaving gaps open. Seal cracks, holes and the gap at the walls, and dam doorways, or the liquid runs away underneath.
- Guessing the water. Measure the water for each bag exactly; extra water weakens it and can make the surface dusty.
- Working alone on a big floor. Working time is short, so have one person mixing while another pours and spreads.
Tips before you buy
- Prime the floor first with the primer the leveler’s maker specifies. Without it, the leveler can pinhole, crack or lose its bond.
- Self-leveler sets fast. Mix and pour one bag at a time with a helper, and keep going until the floor is done so it flows together.
- Dam doorways and fill gaps at the walls with foam or caulk first, or it will flow away under the trim.
- Most self-levelers are underlayments, meant to be covered with flooring. For a bare garage or workshop floor, look for one sold as a wear or resurfacing surface.
Common questions
How much does a 50 lb bag of self-leveler cover?
Usually about 45 to 50 square feet at 1/8 inch, or 23 to 25 square feet at 1/4 inch. Check the bag for your product.
How many bags of self-leveler for a 12 × 12 room?
About 7 bags at an average of 1/4 inch, with 10% extra, if each bag covers 47 sq ft at 1/8 inch.
How thick can self-leveling concrete be poured?
It depends on the product. Many go from about 1/8 inch up to 1 to 1½ inches in one pour. Check the bag.